A unique Dual-Laser engraving system combining all the features of the FlexoStar CTP, but with the addition of a CDI Laser imaging system, for ablation of photopolymer plates.
The ideal system for busy trade shops, needing an ITR (In the round) Laser system and additional CDI capacity.
The ideal system for busy trade shops, needing an ITR (In the round) Laser system and additional CDI capacity.
- Standard model has 1.800 mm maximum engraving width. Larger engraving widths available in 500 mm wider increments
- Maximum engraving height (repeat length): Standard model is prepared for circumferences which produce up to 1250 mm repeat length
- Pendant touch screen operator panel
- Machine and engraving function control software
- Two (2) optical engraving lenses included as part of standard supply
DuoStar work piece choices:
Remote on-line servicing capability comprising:
- Self-centering three claw chuck and live center
- Removable air mandrel
- Fixed, non-removable drum (optional)
- Cantilevered air mandrel (optional)
Remote on-line servicing capability comprising:
- On-line remote software access of inspection and
control of machine functions
![DIRECT LASER ENGRAVING PRODUCTION [CO2 LASER]](../images/subtitle_specs_direct_laser.gif){kind=small}
- One sealed nominal 500 Watt CO2 laser
- Resolutions range from 500 dpcm to 1.150 dpcm
(1.250 to 2.900 dpi) for typical screens ranging
from 26 to 70 lpcm (65 to 175 lpi) - Practical print form resolution up to
3.500 dpi x 3.500 dpi. - Production rate from 0.4 to 1.2 m2 / hour depending
of selected resolution and engraved relief depth.
Typical engraving production of 0,65 m2 / hour with
0,5 mm relief and resolution of 750 dpcm (1900 dpi)
Typical engraving production of 0,65 m2 / hour with
0,5 mm relief and resolution of 750 dpcm (1900 dpi)
- Process work line screens up 80 lpcm (200 lpi)
- Note: engraved relief depth will vary for different
elastomer material formulations - Screen ruling up 80 lpcm (200 lpi)
![CDI MASK IMAGING PRODUCTION [YAG LAYER]](../images/subtitle_specs_cdi_mask.gif){kind=small}
- One sealed nominal 30 Watt YAG laser
- Suited for high resolution imaging of LAM masked photopolymers
- Productivity: 1,0 m2/hour at 1600 ppi
- Halftone from 1 to 99 percent
- Screen ruling up 80 lpcm (200 lpi)
- Resolution fully scalable from 1800 to 4000 ppi
Standard model 1800 mm: approx. 3700kg 
- Power: 3x400/230V 50Hz, 40 amp fuse
- Compressed air: 6-9 bar, 200 L/min.
- Cooling water for CO2 laser: min. 9,5 L/min,
10-30 °C at 50-75 PSI - Purged gas: 99,95% nitrogen, 2.8 L/min at 5 PSI
